供應VICKERS低壓過濾器DG5V-8-H-6C-T-M-U-H-10
element pressure drop 0,35 bar (5 psi). Refer to
individual pressure drop curves, page 19, to obtain filter
assembly pressure drop information (P Total = P
H

更新時間：2025-07-15

訪問量：2730

廠商性質：經銷商

在線詢價 聯系我們

產品介紹

供應VICKERS低壓過濾器DG5V-8-H-6C-T-M-U-H-10
pressure drop and prevents element
collapse and release of retained
contaminants back into hydraulicsystem.
The following sizing recommendations are based on using mineral
oil at 30 mm2/s (cSt) viscosity, maximum housing pressure drop 0,4
Filters are thoroughly multipass tested
(ISO 4572, β ≥ 200) and rated to
achieve cleanliness levels in
accordance with ISO 4406. For

供應VICKERS低壓過濾器DG5V-8-H-6C-T-M-U-H-10

assistance in selecting a target
cleanliness level, consult American
National Standard Institute ANSI
(NFPA/JIC) T2.24.1-1991 or your local
Vickers representative
bar (6 psi), maximum clean element pressure drop 0,8 bar (12 psi).
Refer to individual pressure drop curves, pages 13 and 14, to obtain
filter assembly pressure drop information (P Total = P Housing +
The following sizing recommendations are based on
using mineral oil at 30 mm2/s (cSt) viscosity, maximum
housing pressure drop 0,15 bar (2 psi), maximum clean